Durable galvanized mild steel construction withstainless steel hinges and latches.
Automatic gas strut self opening system withsafety latch and padlock security.
Range of standard sizes available in stock. Custom made to you
specific needs.
Primarily designed to replace traditional beer drop trap
door(s) for public houses. They are a hot dipped galvanized mild
steel construction for durability complimented by stainless
steel furniture (Hinges and latches) and weather resistant
seals closed cell foam seals around all joints.
Rather than needing to lift the cellar trap door open the External Beer Drop Door opens automatically to a vertical position against a restraint chain when released from below and automatically lock in to position with a safety latch. This aids the prevention of unnecessary injury.
Putting a slight downwards pressure on the door(s) once the safety latches are released will close will close and latch the doors. A padlock is supplied and fits between each door below ground on the centre joint for extra security.
Standard duty doors are pedestrian rated duty (5Kn / M²) but have been tested to with stand motor vehicles with out damage.
Maintenance is keep to a minimum and just cleaning the seals and a drop of light oil on the hinges is all that's required. NO NEED FOR COSTLY SERVICING BY ENGINEERS.
"Standard" sizes are available in stock in common width of 1100mm inside frame dimension and a range of lengths from 700mm to 1500mm in 100mm increments and an extra long one at 1650mm.
The option of delivery only will be on a pallet with the trap door fully assembled and ready for fitting with full illustrated instructions. Alternatively a deliver and install service is also available.
Rather than needing to lift the cellar trap door open the External Beer Drop Door opens automatically to a vertical position against a restraint chain when released from below and automatically lock in to position with a safety latch. This aids the prevention of unnecessary injury.
Putting a slight downwards pressure on the door(s) once the safety latches are released will close will close and latch the doors. A padlock is supplied and fits between each door below ground on the centre joint for extra security.
Standard duty doors are pedestrian rated duty (5Kn / M²) but have been tested to with stand motor vehicles with out damage.
Maintenance is keep to a minimum and just cleaning the seals and a drop of light oil on the hinges is all that's required. NO NEED FOR COSTLY SERVICING BY ENGINEERS.
"Standard" sizes are available in stock in common width of 1100mm inside frame dimension and a range of lengths from 700mm to 1500mm in 100mm increments and an extra long one at 1650mm.
The option of delivery only will be on a pallet with the trap door fully assembled and ready for fitting with full illustrated instructions. Alternatively a deliver and install service is also available.
Click here for sizes
| Length | Width |
| 900mm | 1100mm |
| 1000mm | 1100mm |
| 1100mm | 1100mm |
| 1200mm | 1100mm |
| 1300mm | 1100mm |
| 1400mm | 1100mm |
| 1500mm | 1100mm |
| 1650mm | 1100mm |
Also try
Internal - Clear View Door | Tray Type | Grille Safety Door | 60 min Fire Door | Staircase Door | Beer Drop Door
External - Basement Access Door | Maintenance Access Door | Skids & Steps | Ladders | Chutes
Internal - Clear View Door | Tray Type | Grille Safety Door | 60 min Fire Door | Staircase Door | Beer Drop Door
External - Basement Access Door | Maintenance Access Door | Skids & Steps | Ladders | Chutes